Introduction; Intended Utilisation; Operating Elements; Items Supplied - Parkside PWP 90 A1 Bedienungs- Und Sicherheitshinweise

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
n
Rated idle running speed
0
W
Watts (Effective power)
Polishing machine PWP 90 A1
Wax application, buffing and wax
removal from vehicle finishes
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools cor-
rectly. Further details can be found in the operating
instructions. Keep these instructions in a safe place.
If you pass the device on to anyone else, please
ensure that you also pass on all the documentation.

Intended Utilisation

Q
This appliance is intended exclusively for the waxing
and buffing / polishing of paint finishes applied to
vehicles, boats and caravans / campervans. Use
the appliance only as described and only for the
areas of application specified. Any other use of,
and modification to, the appliance is deemed to be
improper usage and may result in serious physical
injury. The manufacturer declines to accept respon-
sibility for damage(s) arising out of usage contrary
6 GB
V ~
Voltage
Safety class II
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Keep children away from
electrical devices!
Risk of loss of life by electric shock
from damaged mains lead or mains
plug!
Dispose packaging and appliance in
an environmentally-friendly way!
to the instructions specified below. The appliance is
not intended for commercial use.

Operating elements

Q
Hand grips
1
Buffing plate
2
On / OFF switch
3
Mains connection lead
4
Terrycloth bonnets
5
Synthetic polishing bonnets
6

Items supplied

Q
1 Polishing machine PWP 90 A1
2 Terrycloth bonnets
2 Synthetic polishing bonnets
1 Operating manual

Technical Data

Q
Polishing machine PWP 90 A1
Rated voltage:
Rated power:
no-load rotational speed: n
230 V∼, 50 Hz
90 W
= 3300 min
-1
0