JVC kd-sh99r Bedienungsanleitung Seite 42

3
Start searching an ensemble.
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service you want to listen to.
42
Press ¢
to search
ensembles of higher
frequencies.
4 to search
Press
ensembles of lower
frequencies.
1 Press M/B (mode/band).
2 Press ¢
or
4 to select a
service you want.
To change the display information while
tuning into an ensemble
Normally service name is shown on the display.
If you want to change the display information,
press D (display).
Each time you press the button, the following
information appears on the display for a while.
Service name
Ensemble name
Channel number
Frequency
To tune into a particular ensemble without
searching:
1
Press SOURCE to select DAB tuner as the
source.
2
Press and hold M/B (mode/band) for more than
1 second repeatedly to select the DAB band
(DAB 1, DAB 2 or DAB 3).
Press and hold ¢
3
than 1 second. "MANUAL" flashed on the
display.
Press ¢
4
or
ensemble you want is reached.
• If you hold down the button, the ensembles
keep changing until you release the button.
4 for more
or
4 repeatedly until the