Idling Speed - SELVA MARINE Goldfish 4 Wartungsanleitung

INSP
ADJ
CONTROL SYSTEM
1
b
a

Idling speed

NOTE:
Before adjusting the idling speed, the throt-
tle cable slack should be properly adjusted.
1. Turn the pilot screw 1 until it is lightly
seated.
2. Turn the pilot screw 1 in direction a or
b until the idling speed is at highest
position by the specified number of
turns.
Pilot screw:
1-7/8 ± 1/2 turns out
3. Measure:
9 Idling speed
Out of specification ® Adjust.
Idling speed:
1,500 ± 50 r/min.
Measurement steps:
8 Start the engine and allow it to warm
up for a few minutes.
8 Attach the tachometer to the spark
plug lead of cylinder.
Tachometer:
90890-06760
3-4
E