Starter-In-Gear Protection Lever Inspection; Drive Pawl And Spring Inspection; Sheave Drum Inspection; Spiral Spring Inspection - SELVA MARINE Goldfish 4 Wartungsanleitung

POWR
RECOIL STARTER
Start-in-gear protection lever inspection
1. Inspect:
9 Start-in-gear protection lever
Crack/Wear/Damage ® Replace.

Drive pawl and spring inspection

1. Inspect:
9 Drive pawl
Crack/Wear/Damage ® Replace.
Drive pawl springs
9
Broken/Bent/Damage ® Replace.

Sheave drum inspection

1. Inspect:
9 Sheave drum
Crack/Wear/Damage

Spiral spring inspection

1. Inspect:
9 Spiral spring
Broken/Bent/Damage ® Replace.

Starter rope inspection

1. Inspect:
9 Starter rope
Fray/Wear/Damage ® Replace.
NOTE:
9 When replacing the rope, cut it the speci-
fied length and burn the rope end so that
it will not trouble.
9 Apply water resistant grease sufficiently
on the new starter rope.
Starter rope length:
1,800 mm (70.9 in)
5-5
E
® Replace.