SELVA MARINE Goldfish 4 Wartungsanleitung Seite 244

LOWR
4
3
2
4
3
3
4
DRIVE SHAFT, FORWARD GEAR AND SHIFT ROD
5
1
6
2
2
SERVICE POINTS
Pinion and forward gear removal
1. Remove:
Shift rod 1
9
Circlip 2
9
Pinion gear 3
9
Plate washer 4
9
Drive shaft 5
9
Forward gear 6
9
NOTE:
When removing the pinon gear, pull up the
drive shaft slightly.
Lower case disassembly
1. Remove:
Ball bearing (forward gear)
9
NOTE:
Install the bearing puller in the forward
gear bearing, and tighten the puller so that
claws hold the inner race of the bearing;
see the illustration. Remove the bearing
with the bearing puller.
Stopper guide plate 2:
90890-06501
Bearing puller 3:
90890-06535
Stopper guide stand 4:
90890-06538
2. Remove:
9 Oil seals
NOTE:
Install the puller attachment and puller in
the drive shaft oil seals, tighten the puller
so that claws hold the oil seals and remove
the seals with the puller.
6-18
E