Engine Stop Switch - SELVA MARINE Goldfish 4 Wartungsanleitung

ELEC
1
3
1
2
3
IGNITION SYSTEM
2
1
4
SPARK PLUG CAP (STANDARD)
1. Inspect:
9 Spark plug cap
Cracks/damage ® Replace.
9 Plug cap spring
Deformity/Damage ® Replace.
Replacement steps:
(standard type)
8 Remove the high-tension cord 2
from the spark plug cap 1 by pulling
it.
8 Remove the plug cap spring 3 and
lift up from the high-tension cord 2.
8 Cut off the end of the high-tension
cord about length a.
Length a a :
5 mm (0.2 in)
8 Strip off cord end about a and fit the
plug cap spring 3.
8 To fit the high-tension cord to the
spark plug cap push into the plug
cap.
8 Bind the plug cap 1 bottom tightly
with the clamp clip 4 and fasten it.

ENGINE STOP SWITCH

1. Check:
9 Continuity
No continuity ® Replace.
Remove the
lock plate 1.
Install the
lock plate 2.
Push the
Button 3.
8-9
E
Lead color
White Black
1 1
1 1