Print Media; Basic Settings - Weidmuller PrintJet Handbuch

• Avoid installing the PrintJet in any location where it is subject to rapid changes in temperature and humidity. Ensure that the PrintJet is not
exposed to direct sunlight, strong light or excessive heat.
• Avoid locations subject to impact shocks and vibrations.
• Do not install the device in dust-filled surroundings.
• When installing, ensure that the PrintJet is sufficiently ventilated on all sides.
• Install the PrintJet near a socket outlet, ensuring that the plug can be easily removed at all times.
D. Connecting the PrintJet
This device is subject to special conditions regarding its connection to the mains supply (EU Member States).
The supply impedance at the point of connection to the public electricity supply must not exceed (0.14 + i 0.09) Ohm. In all
other cases, consult the power supply company before connecting the device to the public supply system. Please remove the
status monitor if connecting the PrintJet to a network.
E. Print media
The PrintJet should only be used for printing Weidmüller - MultiCards.

4. Basic settings

4.1 Printjet: Configuring drivers
With the assistance of the Start menu (Windows 98, 95, 2000, NT und XP).
To launch the PrintJet software, click Start, point to Settings, Printers, and then click Epson Stylus C 62.
Windows 95/98
Select "Epson Stylus C 62", and then click Properties in the File menu.
Windows 2000
Select "Epson Stylus C 62", and then click Printer Preferences in the File menu.
Windows NT 4.0
Select "Epson Stylus C 62", and then click Document Name in the File menu.
Set the following parameters:
Best Photo
Plain Paper
5