Herunterladen Diese Seite drucken

Egg Tray; Sliding Body Shelves - Beko GNE 60021 X Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für GNE 60021 X:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 59
1. Freezer Compartment
Temperature Indicator
It indicates the temperature set for
Freezer Compartment.
2. Error Status Indicator
If your refrigerator does not cool
adequately or if there is a sensor
failure, this indicator will be activated.
When this indicator is active,
Freezer Compartment Temperature
indicator will display "e" and Fridge
Compartment Temperature Indicator
will display numbers such as "1, 2,
3...". These numbers on the indicator
provides information about the error to
the service personnel.
3. Fridge Compartment
Temperature Indicator
Indicates the temperature set for
Fridge Compartment.
4. Fridge Compartment
Temperature Setting Button
Press this button to set the
temperature of the fridge
compartment to 8, 6, 4, 2, 8...
respectively.Press this button to set
the desired temperature for the Fridge
Compartment.
5. Economy Mode Indicator
Indicates that the refrigerator is running
in energy-efficient mode.
6. Ioniser Indicator
Indicator light lights up continuously.
This light indicates that your
refrigerator is protecting against
bacteria.
7. Freezer Compartment
Temperature Setting Button
Press this button to set the
temperature of the freezer
compartment to -18, -20, -22, -24,
-18... respectively. Press this button
to set the desired temperature for the
Freezer Compartment.

Egg tray

You can install the egg holder to the
desired door or body shelf.
Never store the egg holder in the
freezer compartment

Sliding Body Shelves

Sliding body shelves can be pulled
by slightly lifting up from the front and
moved back and forth. They come to
a stop point when pulled towards front
to allow you reach the foods placed at
the back of the shelf; when it is pulled
after slightly lifted upwards at the
second stop point, the body shelf will
be released.
The shelf should be held tightly from
the bottom as well in order to prevent
it from tipping over. The body shelf is
placed on the rails at the sides of the
refrigerator body by bringing it to one
lower or one upper level.
The body shelf should be pushed
backwards to seat it completely.
17
EN
1
2
3
4

Werbung

loading