Correcting Malfunctions - Dirt Devil Handy Zip Bedienungsanleitung

5 Correcting malfunctions

Using other nozzles (optional accessories)
B. Assembling the nozzle adapter
(less suction performance)
Assembly:
1. Insert the nozzle adapter (Fig. 6/1) with
the rear section (Fig. 6/2) into the nozzle
protection part and flip it forwards. It clicks
into place.
2. Insert the suction hose (Fig. 6/3) into the
opening up to the stop point. It clicks
audibly into place.
Removing:
1. Press the release button (Fig. 6/4) and
remove the hose.
2. Press the release button (Fig. 6/5) on the
nozzle adapter and remove the nozzle
adapter.
4.2 Using other nozzles (optional
accessories)
You can put the nozzles that are included in
the accessories set onto the suction hose
(Fig. 2/1) and combine them how ever you
like.
WARNING:
Switch the hand-held vacuum cleaner off
before assembling
accessories.
Use the optional accessories as follows:
-Insert tube (Fig. 2/2)
Use this to extend the suction hose.
-Crevice nozzle (Fig. 2/3)
Use this to vacuum dust from hard to
reach places.
-Furniture brush (Fig. 2/6)
Use this to vacuum dust off objects that
have sensitive
cupboards, doors).
or removing the
surfaces (e.g.
5 Correcting malfunctions
Before sending the appliance to Royal
Appliance Customer
following table to check whether you can
correct the malfunctions yourself.
WARNING:
Switch off the
troubleshooting. Never use a defective
appliance.
Malfunction Possible cause
Appliance does Plug is not plugged in or
not work the appliance is not
switched on.
switch on appliance.
Socket does not carry
any current.
vacuum cleaner at
another socket which
you are sure carries
current.
Power cable is
damaged.
replaced by Royal
Appliance Customer
Services.
Appliance does Dust bag is full or
not suck up any blocked.
dirt
Brush does not Belt is defective or worn-
turn out.
®
Services, use the
appliance before
Solution
Plug in plug and
Test the hand-held
Have the cable
®
Empty dust bag.
Replace belt.
15