Correcting Malfunctions; Cleaning; Cleaning The Housing; Cleaning The Filters - Dirt Devil VISION V1 Bedienungsanleitung

6 Correcting malfunctions

6 Correcting malfunctions
Before sending the appliance to Royal
check whether you can correct the malfunctions yourself.
WARNING:
Before starting to troubleshoot, switch the appliance off and pull out the mains plug. Never use a
defective appliance.
Malfunction Possible cause
Appliance does Plug is not plugged in or the
not work appliance is not switched on.
Socket does not carry any
current.
Power cable is damaged.
Appliance does Dust container is full or blocked. Empty/clean dust container.
not suck up any
Filter is dirty.
dirt
Nozzle, telescopic tube or suction
hose are blocked.
Brushing roller does not turn, V-
belt is defective
Appliance makes Sucked in particles are blocking
a strange noise the air-way.
7

Cleaning

WARNING:
Before you clean the appliance, switch off the appliance and remove the mains plug.

7.1 Cleaning the housing

Only clean the housing with a slightly damp cloth. Do not use any cleaning agent, scouring agent or
alcohol as these can damage the housing.

7.2 Cleaning the filters

To clean the filters, ZChapter 4, "Filters".
£
Appliance Customer Services, use the following table to
Solution
Plug in plug and switch on appliance,
ZChapter 3.1, "Vacuuming".
Test the brush vacuum cleaner at another
socket which you are sure carries current.
Have the cable replaced by Royal
Appliance Customer Services, address,
ZPage 39, "Warranty".
Clean the corresponding filter, ZChapter 4,
"Filters".
Remove the blockage. If necessary, use a
long wooden rod for this (e.g. a broom
handle).
Replace the V-belt,
ZChapter 5.1, "Changing the V-belt".
Remove the particles. If necessary, use a
long wooden rod for this (e.g. a broom
handle).
£
37