For Child Between 9-18Kg / 1- 4 Years Old; Installation For Forward-Facing Toddler Mode; Securing Your Child In The Child Restraint; Youth Mode - Joie stages Bedienungsanleitung

Toddler Mode
(for Child between 9-18kg / 1–4 years old)
Reference age 1- 4 years old
Seat position Positions 1-3 (with top triangle and a red triangle aligned
! Please install the child restraint on the vehicle seat first, and then place the child in the child restraint.
i. Installation for Forward-Facing Toddler Mode
Note
1. Please adjust the child restraint to the proper recline position (3 positions for forward-facing Toddler
mode). Angle indication: With top triangle and a red triangle aligned
(Reclining Adjustment).
! Recline position must be selected before child restraint is installed in the vehicle. Recline is not
intended to be adjusted while child restraint is installed in vehicle. Adjusting the recline while child
restraint is installed in vehicle may loosen installation of child restraint leading to death or serious
injury in a crash.
2. Please adjust the shoulder harness straps to the proper height before installing the child restraint. Please
refer to Page 15 (Height Adjustment for Head Support and Shoulder Harness Straps).
3. When installing and adjusting the vehicle belts, make sure that both the vehicle shoulder belt and the
vehicle waist belt are not twisted or the belts may not function properly.
! It is not recommended to install child restraint forward facing on front seat with airbag. Please
reference vehicle owner's manual for more information.
1. Thread the vehicle belt through the two forward-facing vehicle belt slots at the back of the
child restraint. 23
2. Engage the vehicle buckle tongue into the buckle.
3. While pressing the child restraint down firmly into the vehicle seat, pull the vehicle shoulder belt to
fasten the child restraint tightly and securely.
! The child restraint cannot be used if the vehicle safety belt buckle (female buckle end) is too long
to anchor the child restraint securely.
4. Open the lock-off device and insert the shoulder safety belt.
! Please check if the child restraint is installed tightly by moving the child restraint back and forth
at the vehicle belt path. (child restraint should not move more than 25mm/1").
The assembled vehicle belt is shown in 27 .
! Vehicle Shoulder belt passes through Lock-off Device.
! Vehicle Waist belt passes through the forward-facing vehicle belt slots.
! The vehicle buckle tongue is engaged with the buckle correctly shown in.
17
5 ).
. Please refer to Page 15
5
24
25
- 1
25
26
- 1
27
- 2
27
- 3
27
ii. Securing your Child in the Child restraint
Note
1. When installing the child restraint in the forward-facing Toddler mode, do not use the infant insert.
2. Please install the child restraint on the vehicle seat, and then place the child in the child restraint.
3. After the child is placed into the child restraint, double check whether the shoulder harness straps are
at the proper height. Please refer to Page 15 (Height Adjustment for Head Support and Shoulder
Harness Straps).
- 1
1. Pull up the webbing lock 17 , while pulling the shoulder harness straps to proper length.
2. Press the red button down to disengage the buckle.
3. Leave the harness straps on the left and right sides of the child restraint.
4. Place the child in the child restraint and engage the buckle.
After the child is seated, double check whether the shoulder harness straps are at the proper
!
height. Please refer to Page 15 (Height Adjustment for Head Support and Shoulder
Harness Straps).
5. Pull down the adjustment webbing and adjust the harness so that your child is snugly secured.
! Make sure the space between the child and the shoulder harness straps is about the thickness of
one hand. 29

Youth Mode

(for Child 15–25kg / 3–7 years old)
Reference age 3 -7 years old
Seat position
Positions 1-2 (with top triangle and a red triangle aligned
i. Converting from Toddler Mode to Youth Mode
1. Press the red button down to disengage the buckle.
2. Remove the infant insert and crotch pad.
- 1
3. Detach the snaps 30 and the hook and loop fastener on the seat pad.
4. Lift the upper flap of seat pad upward and pull the lower flap forward. Then store the shoulder straps
- 3
30 and buckle tongues in their storage compartments.
5. Pull the buckle through the slot in the seat pad and then store the buckle in its storage
- 5
compartment. 30
- 1
6. Reattach the snaps 30 and the hook and loop fastener
! To convert back to Toddler mode from Youth mode, please reverse the above steps.
- 2
17
18
28
21
29
5
).
18
- 2
30
- 4
30
- 2
30 to recover the seat shell. 31
18