Adjusting The Browning Level; Toasting; Interrupting The Toasting Process; Warming Function - Silvercrest STOD 800 A1 Bedienungsanleitung

Adjusting the browning level

The desired level of browning, from "light" (1) to
"dark" (8), can be adjusted with the browning
buttons 3.
Take note that, subject to the demand made on
the toaster, the level of browning can vary so-
mewhat with an unvarying adjustment of the
browning level! The less the number of slices in-
serted, the higher is the browning level. Thus, if
you are not intending to toast many slices, al-
ways adjust the browning level a little lower.

Toasting

Attention:
When the appliance is in operation, do NOT cover
the toasting slots 8. There will be a risk of fire! The
appliance could be irreparably damaged!
• After setting the desired browning level using the
browning buttons 3, insert the bread into the
toaster slots 8.
• Press the operating slide 1 downwards. The ap-
pliance emits an acoustic signal. The control
lamp on the stop button 5 glows. The automatic
bread aligner centres the inserted bread into the
toasting slots 8.
When the desired level of browning has been reached,
the toaster automatically switches itself off and the
slices are ejected to the top. 3 Signal tones sound.
This appliance has a lifting function, which makes
it easier and safer for you to take the hot slices
of toast from the toasting slots 8. For this, slide
the operating slide 1 upwards.
Interrupting the toasting
process
If you wish to interrupt the toasting process, press
the STOP button 5. A signal tone sounds. The toaster
switches itself off. The control lamp extinguishes. The
slices of bread are ejected.

Warming function

The warming function 4 makes it possible for you
to warm bread without browning it. For example,
toast that has gone cold. The bread is only briefly
warmed.
• Insert the bread and press the operating slide 1
down. A signal tone sounds.
• Activate the button for the warming function 4.
The control lamp integrated into the button for the
warming function 4 glows. A signal tone sounds.
• The toaster switches itself off automatically, the
control lamp extinguishes, 3 signal tones sound
and the bread slices are ejected to the top.

Thaw function

Through activation of the thaw function 2 frozen
bread can also be thawed. With this, the toaster
slowly warms the bread.
• Using the browning buttons 3, select the des-
ired level of browning.
• Insert the bread and press the operating slide 1
down. A signal tone sounds.
• Activate the button for the thaw function 2. The
control lamp integrated into the button for the
thaw function 2 glows. A signal tone sounds.
• The toaster switches itself off automatically, the
control lamp extinguishes and the bread slices
are ejected to the top. 3 signal tones sound.
If you set the browning at a level higher than 1,
it is possible that the bread may be slightly
browned.
- 24 -