Before Taking Into Use; Operation; Adjusting The Browning Level; Toasting - Silvercrest STC 950 D3 Kurzanleitung

Before taking into use

■ Operate the toaster without bread for 3 times at the maximum browning
level "6".
■ Clean the appliance housing only with a dry or lightly moistened cloth.
■ Wipe the bread roll rack off with a damp cloth.
NOTICE
► The operating button only engages when the cable is connected to a
mains power socket.
► With the first usage a slight smell can arise (minimal smoke development is
also possible). This is normal and dissipates after a short time. Provide for
sufficient ventilation. For example, open a window.

Operation

Adjusting the browning level

The desired level of browning, from "light" (1) to "dark" (6), can be adjusted
infinitely with the toasting dial.

Toasting

CAUTION! RISK OF FIRE!
► Do not cover the toasting slots when the appliance is in operation. There
will be a risk of fire! The appliance could be irreparably damaged!
NOTICE
► If you only want to put one piece of toast into the toaster, turn the toasting
dial down by approx. 1 level to achieve the same level of browning as with
two pieces of toast.
1) After setting the desired browning level, insert the bread into the toaster
slots.
2) Press the operating button downwards. The automatic bread centring device
centres the inserted bread in the toaster slots. During the toasting process the
control lamp integrated in the "Stop" button
3) When the desired level of browning has been reached the toaster switches
itself off automatically, the slices are ejected to the top and the control lamp
goes out.
STC 950 D3
glows.
GB │ IE │
7 ■