Specifications - Makita BHR200 Bedienungsanleitung

ENGLISH
1-1. Battery cartridge
1-2. Red part
1-3. Button
2-1. Switch trigger
3-1. Reversing switch lever
4-1. Rotation with hammering
4-2. Lock button
4-3. Pointer
4-4. Change lever
5-1. Rotation only
5-2. Pointer
6-1. Hammering only
6-2. Pointer

SPECIFICATIONS

Capacities
No load speed (min
Blows per minute
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Intended use
The tool is intended for hammer drilling and drilling in
brick, concrete and stone as well as for chiselling work.
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
For European countries only
Noise and Vibration
The typical A-weighted noise levels are
sound pressure level: 89 dB (A)
Explanation of general view
7-1. Foot
7-2. Battery cartridge
8-1. Foot
8-2. Screw
8-3. Battery cartridge
9-1. Side grip
10-1. Bit shank
10-2. Bit grease
11-1. Bit
11-2. Chuck cover
13-1. Change lever
13-2. O symbol
14-1. Change lever
Model
Concrete
Steel
Wood
-1
)
Overall length
Net weight
Rated voltage
equipment and
environmentally compatible
END001-1
sound power level: 100 dB (A)
Uncertainty: 3 dB(A)
The typical weighted root mean square acceleration
value is 9 m/s
These values have been obtained according to
EN60745.
Model; BHR200
EC-DECLARATION OF CONFORMITY
its
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745,
Directives, 89/336/EEC, 98/37/EC.
ENE043-1
000087
MAKITA INTERNATIONAL EUROPE LTD.
ENG006-2
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan
4
15-1. Depth gauge
15-2. Clamp screw
15-3. Grip base
16-1. Dust cup
18-1. Blow-out bulb
20-1. Drill chuck
20-2. Change lever
20-3. Pointer
21-1. Limit mark
22-1. Brush holder cap
22-2. Screwdriver
BHR200
20 mm
13 mm
27 mm
0 - 1,100
0 - 4,700
316 mm
4.0 kg
D.C. 24 V
Wear ear protection.
2
.
EN55014 in accordance
Yasuhiko Kanzaki CE2006
Director
ENH102-5
with Council