Pump Particuler - baltur BTL14P Betriebsanleitung

FAN ASSEMBLY DIAGRAM
SUNTEC PUMP mod. AT 3 45A / 3 55A with built in filter
1 Solenoid blocking valve for in line cutt-off
(usually closed) 1 flame
st
2 Solenoid valve for switch-over between low and high
modes (usually open) 2
3 Pressure outlet
(pressure take-off for air gate hydraulic jack)
4 Low pressure regulator (1
5 High pressure regulator (2
6 Suction
7 Return internal by-pass plug
8 Pressure outlet
(pressure gauge port and air bleed valve 1/8")
9 Vacuum gauge port 1/8"
10 Nozzle outlet
N.B. The pump is preset at a 10 bar pressure (1
and 18 bar (2 flame).
nd
flame
nd
flame)
st
flame)
nd
flame)
st
TWO STAGE LIGHT OIL BURNERS
- Observe the measurements indicated in the diagram
when fitting the fan.
N° 0002934540
Rev. 04/04/2005
N° 8736
Rev. 10/05/1988
23