Assembly Procedure - FLORABEST FGW 84 A1 Bedienungsanleitung

Assembly procedure

GB
15
6
Step 1
♦ Connect the shelf brackets
and M6 nuts.
Please take note that only the lower hole of the shelf bracket
making the bolted connection.
♦ Fix the reinforcing braces
and M6 nuts. Fix the reinforcing braces
M6x12 bolts and M6 nuts.
♦ Fit the left wheel braces
using the M6x12 bolts, Ø6x16 washers and M6 nuts. The upper hole in
the wheel braces 14
14
Step 2
♦ Assemble the handle holder
Fix the handle 7
them by means of the wood screws Ø 4x15.
♦ Fit the right stand braces
the M6x12 bolts, Ø6x16 washers and M6 nuts. The upper hole in the
stand braces 9 in needed to do this.
to the wheel braces
15
16 to the wheel braces
16
14 with attached shelf brackets
is needed to do this.
15
8 and stand braces
between the short handle holders
9 with the fi tted handle to the fi re bowl
8
7
9
using M6x12 bolts
14
is used for
15
14 using M6x12 bolts
to the shelf brackets
15
15 to the fi re bowl
6
14
16
9 as described in step 1.
8 and then secure
6
using
6
6 using
FGW 84 A1