Assembly Procedure - FLORABEST FGW 84 A1 Bedienungsanleitung

Assembly procedure

GB
15
6
Step 1
♦ Connect the storage holder
washers Ø 5.4, M5 x 10 screws and nuts M5.
Please take note that only the lower hole of the storage holder
used for the screws.
♦ Secure the reinforcing braces
the washers Ø 5.4, M5 x 10 screws and nuts M5. Secure the reinforcing
braces with the storage holders
16
M5 x 10 screws and nuts M5.
♦ Assemble the wheel braces
to the left of the fire bowl
screws and nuts M5. For this, use the upper hole in the wheel braces
Ensure that the holes for mounting the wind protection
are facing backwards.
14
Step 2
♦ Assemble the handle holder
Fix the handle
7
them by means of the wood screws Ø 4 x 10.
♦ Assemble the stand braces
the fire bowl by means of M5 x 12 screws, washers Ø 5.4, M5x10
6
screws and nuts M5. For this, use the upper hole in the stand braces
Ø 4x10
M5x10
with the wheel brace
15
with the wheel braces
16
by means of the washers Ø 5.4,
15
, with the assembled storage holder
14
by means of the washers Ø 5.4, 2 M5x12
6
15
and stand braces
8
between the short handle holders
9 , with the assembled handle, to the right of
8
7
Ø 4x10
9
by means of the
14
15
by means of
14
on the firebowl
3
M5x10
6
M5x12
14
16
M5x12
as described in step 1.
9
and then secure
8
M5x10
6
M5x12
M5x10
is to be
,
15
.
14
6
M5x10
9 .
FGW 84 A1