Tests And Approvals; Electrical Components - Viper FANG 32T-EU Bedienungsanleitung

This machine must not be used on roads or public streets.
Viper machines can be used in combination with standard detergents which cannot damage any materials of Viper machines
(no use of solvents or other aggressive liquid materials). Viper will not pay any claims regarding using aggressive detergents in
Viper machines. If you need a special detergent for cleaning purposes, please contact your Viper dealer.
Pay attention during machine transportation when temperature is below freezing point. The water in the tank or in the hoses
could freeze and seriously damage the machine.
MAINTENANCE
To ensure machine proper and safe operation, the scheduled maintenance shown in the relevant chapter of this manual, must be
performed by the authorised personnel or by Viper Service Center.
Carefully read all the instructions before performing any maintenance/repair procedure.
Do not work under the lifted machine without supporting it with safety stands.
Do not wash the machine with direct or pressurised water jets, or with corrosive substances.
GUARANTEE
Our general conditions of business are applicable with regard to the guarantee.
Unauthorised modifications to the appliance, the use of incorrect brushes and detergents in addition to using the appliance in a
way other than for the intended purpose exempt the manufacturer from any liability for the resulting damage.

TESTS AND APPROVALS

Electrical tests must be performed in accordance with the provisions of safety regulations (BGV A3) and to DIN VDE 0701
Part 1 and Part 3.
In accordance with DIN VDE 0702 these tests must be performed at regular intervals and after repairs or modifications.

ELECTRICAL COMPONENTS

DANGER
Batteries.
Risk of explosion.

Battery charging produces highly explosive hydrogen gas. Keep the tank assembly open during battery
charging and perform this procedure in well-ventilated areas and away from naked flames.

To reduce the risk of fire, electric shock, or injury, do not leave the machine unattended when it is
plugged in. Before performing any maintenance procedure, disconnect the battery charger cable from the
electrical mains.

Do not smoke while charging the batteries.

The use of non-genuine spare parts, accessories, batteries and chargers can impair the safety of the
appliance. Only use spare parts and accessories from Viper and use batteries and chargers which VIPER
recommend. When using non-certified and not recommended batteries and chargers, VIPER will not
cover the cost of damages (warranty) caused of this.
CAUTION
Battery charger.
Electric shock due to faulty mains connecting lead or charger cable.
Touching a faulty mains connecting lead or charger cable can result in serious or even fatal injuries.

Keep the battery away from sparks, flames and incandescent material. During the normal operation
explosive gases are released.

Before using the battery charger, ensure that frequency and voltage values, indicated on the machine
serial number plate, match the electrical mains voltage.

Do not damage the mains power lead (e.g. by driving over it, pulling or crushing it).
USER MANUAL
ENGLISH
11