Wall Mounting; Cleaning - Silvercrest SSMS 600 B3 Bedienungsanleitung

Wall mounting

2 plugs and 2 screws are supplied to enable the wall bracket w to be mounted.
WARNING RISK OF ELECTRIC SHOCK!
► Before mounting the wall bracket
cables or pipes in the wall!
1) Mark the positions for the drill holes using the wall bracket
2) Bore the holes with a 6 mm drill.
3) Insert the dowels into the drill holes.
4) Position both the openings of the wall-holder
fi x it tightly using both screws.

Cleaning

WARNING RISK OF ELECTRIC SHOCK!
► Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket.
►
it in water or holding it under running water.
WARNING - RISK OF PHYSICAL INJURY!
► To avoid injuries, exercise caution when handling the extremely sharp
blade 7. Reassemble the liquidiser after use and cleaning to prevent injury
from the exposed blade. Keep the blade out of the reach of children.
WARNING - PROPERTY DAMAGE!
► DO NOT clean the accessories of your hand blender in the dishwasher as
it may cause damage to them.
► Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
SSMS 600 B3
Under no circumstances may the motor unit 4 be cleaned by immersing
w check whether there are any power
w over the drill holes and then
w.
11
GB