Travel Lock - Silvercrest SRR 3.7 C3 Bedienungsanleitung

NOTE
If...
–
... the shaving result is noticeably poorer, ...
–
... you have to the shave the same spot repeatedly
to achieve a good result, ...
–
... the shave takes much longer than usual, ...
–
... there is visible damage to the shaving heads, ...
... the shaving heads/the cutting unit
You can order the cutting unit
our customer service (see section "Ordering spare parts").
To replace the cutting unit
1) Take hold of the cutting unit
grip recesses
2) Fit the new cutting unit
snaps into place and is seated firmly.

Travel lock

This appliance is fitted with a travel lock. You can lock the On/Off
switch to prevent accidental starting:
Press and hold the On/Off switch
the symbol
locked.
To unlock the appliance, press and hold the On/Off switch
for around 3 seconds, until the
NOTE
If you attempt to switch the appliance on while the travel lock
is activated, the
The appliance will not start.
│ GB │ MT
■ 82
proceed as follows:
and pull it off.
lights up blue. The On/Off switch
symbol
must be replaced.
, incl. shaving heads from
with three fingers in the
onto the shaver. Ensure that it
for around 3 seconds, until
symbol lights up blue five times.
lights up blue once.
is now
SRR 3.7 C3