Shaving With Mains Voltage - Silvercrest SRR 3.7 C3 Bedienungsanleitung

NOTE
► The best results are achieved if used on dry skin.
► It can take 2 to 3 weeks until the skin is accustomed to the
dry shaving system.
4) Move the shaving heads with straight and circular motions over
the skin.
5) After you have covered all the areas you want to shave, use the
On/Off switch
control lamp
6) Clean the shaver after every use with the supplied brush
more thorough cleaning, read the section "Cleaning and care".

Shaving with mains voltage

CAUTION! MATERIAL DAMAGE!
► This appliance is not suitable for wet shaving!
If you want to use the shaver without previously charging it, you can
also use it directly with mains voltage:
1) Plug the connector
2) Plug the mains adapter
the appliance specifications. While the battery is charging, the
red charge indicator light
You can then use the shaver as described in the section "Cordless
shaving".
SRR 3.7 C3
again to turn off the appliance. The blue
goes out.
into the mains connection
into a mains socket that complies with
flashes.
. For a
on the shaver.
GB │ MT │
77 ■