3) Attach the trimmer unit
on the trimmer unit
4) Press the ON/OFF button
charge indicator
as soon as the shaver starts up.
5) When you are finished trimming, press the on/off switch
again to switch the appliance off.
6) Clean the trimmer unit
For a more thorough cleaning, read the section "Cleaning and
care".
Travel lock
To prevent the appliance from switching on unintentionally, you can
lock the ON/OFF button
connected to the mains.
♦
Press and hold down the on/off switch
appears on the display.
If the ON/OFF button
appears briefly. The appliance however does not switch on.
♦
If you want to unlock your appliance again, press and hold
down the ON/OFF button
the symbol
–
5 seconds. The display then disappears and the appliance
can now be switched on again.
│
GB │ CY
■
14
in such a way that both guide pillars
grip the guide rails on the drive shaft
. The symbol
and the
with the supplied brush
. This only works if the appliance is not
is pressed now, the symbol
:
appears and starts to flash for approx.
of the battery
logo are displayed
.
until the symbol
SRR 3.7 D5
.