Travel Lock - Silvercrest SRR 3.7 C3 Bedienungsanleitung

NOTE
If . . .
–
. . . the shaving result is noticeably poorer, . . .
–
. . . you have to the shave the same spot repeatedly
–
. . . the shave takes much longer than usual, . . .
–
. . . there is visible damage to the shaving heads, . . .
. . . the shaving heads/the cutting unit 2 must be replaced .
You can order the cutting unit 2, incl . shaving heads from
our customer service (see section "Ordering spare parts") .
To replace the cutting unit 2 proceed as follows:
1) Take hold of the cutting unit 2 with three fingers in the
grip recesses 3 and pull it off .
2) Fit the new cutting unit 2 onto the shaver . Ensure that it
snaps into place and is seated firmly .

Travel lock

This appliance is fitted with a travel lock . You can lock the On/Off
switch 6 to prevent accidental starting:
Press and hold the On/Off switch
the symbol 9 lights up blue . The On/Off switch
locked .
To unlock the appliance, press and hold the On/Off switch
for around 3 seconds, until the
NOTE
If you attempt to switch the appliance on while the travel lock
is activated, the
The appliance will not start .
■ 16 │ GB │ IE │ NI
to achieve a good result, . . .
symbol 9 lights up blue once .
6 for around 3 seconds, until
symbol 9 lights up blue five times .
6 is now
6
SRR 3.7 C3