Making Espresso - Vitek VT-1515 SR Betriebsanweisung

ENGLISH
–
Unpack the coffee maker, remove any stickers
and package materials that can prevent unit op-
eration.
–
Check the unit for damages; do not use the unit
in case of damages.
–
Make sure that operating voltage of the unit cor-
responds to voltage of your mains.
–
Before using the coffee maker for the first time,
wash all removable parts, the filter holder (15),
the coffee filter (16), the water tank lid (10), the
water tank (11) and the measuring spoon (17)
with warm water and neutral detergent and dry
them.
Washing the boiler
•
Make sure that the button (6) is set to the OFF-
position (is in released position), and the operat-
ing mode selection knob (8) is set to the position
"".
•
Make sure that the water/steam supply button
(4) is not pressed (is in released position "
•
Remove the lid (10) from the water tank (11), then
remove the water tank itself and fill it with cold
water till MAX mark.
•
Cover the tank (11) with the lid (10) and place it on
the coffee maker body (3).
•
Insert the coffee filter (16) into the holder (15),
matching the ledge on the filter (16) with the slot
on the holder (15) and turn the filter (16) clock-
wise or counterclockwise (pic. 1, 2).
•
Without adding coffee into the filter (16), attach
the filter holder (15) to the coffee maker boiler; to
do this, place the filter holder handle (13) under
the «INSERT» marking on the coffee maker body
(3), insert the holder (15) into the boiler and turn
the filter holder handle (13) in the direction of the
«LOCK» marking till bumping (pic. 3, 4)
•
Place a suitable cup on the tray grid (2).
•
Insert the power plug into the mains socket.
Switch the coffee maker on by pressing the «ON/
OFF» button (6), the indicator (7) will light up.
•
Wait till the indicator (5) lights green and then
set the operating mode selection knob (8) to the
position " ". After the cup is filled with water
switch the water supply off by setting the operat-
ing mode selection knob (8) to the position ""
and pour the water out of the cup.
•
Repeat this procedure several times till the boiler
is clean.
Attention!
–
Do not remove the filter holder (15) during the
coffee maker operation.
–
To remove the filter holder (15) turn the handle
(13) towards the marking «INSERT» on the cof-
fee maker body (3) and remove the holder (15).
VT-1515_IM.indd 4
•
Before washing the cappuccinator pipe (12)
place a suitable cup under it.
•
Press the water/steam supply button (4) and wait
till the indicator (5) lights up green, then switch
the steam supply on by setting the operating
mode selection knob (8) to the position "
•
Wait till some water pours from the cappuccina-
tor pipe (12), after that steam will go out more
intensively; switch the steam supply off by set-
ting the operating mode selection knob (8) to the
position "".
•
Press the water/steam supply button (4) to
switch to the coffee making mode (the button
is released).
•
Switch the coffee maker off by pressing the
«ON/OFF» button (6), the indicators (4 and 6)
will go out.
Note: When the water supply is switched on for the
first time, a loud sound of the operating pump and
noticeable vibration of the coffee maker body is
possible, but in 20-30 seconds, when the pump is
").
filled with water, the sound and vibration level will
decrease significantly.

MAKING ESPRESSO

Note: Repeated making of coffee should be per-
formed after at least 5 min interval.
–
Use only clear water for making coffee and keep
the water tank (11) clean.
–
Before making coffee wait till the green indicator
(5) lights up, this shows that the water tempera-
ture in the boiler has reached the required value.
–
Before making coffee warm the cups placing
them on the tray (9), also warm the filter holder
(15) and the filter (16).
–
You can warm the filter holder (15) and the filter
(16) with hot water from the boiler: attach the fil-
ter holder (15) to the coffee maker boiler without
adding coffee into the filter (16) (pic. 3, 4).
–
Place the cup on the tray grid (2).
–
Switch the water supply on for some time; to do
this, set the operating mode selection knob (8) to
the position " ".
–
Remove the cup, detach the holder (15); if there
is any water in the filter (16), lift the filter clamp
(14) and, holding the filter (16) with it, pour out
the water.
–
For making high-quality ready coffee always pre-
liminary warm the filter (16) and the filter clamp
(14).
•
Make sure that the button (6) is set to the posi-
tion «OFF» (is in released position), and the op-
erating mode selection knob (8) is set to the
position "".
4
".
26.03.2013 10:59:51