Lacor 69561 Gebrauchs- Und Instandhaltungsanleitung Seite 76

INSTALLING THE WORK BOWL
1.- Place the work bowl (without the lid) in position as shown in figure 1-2.
The holes in the base and the connectors on the base of the work bowl must fit together.
2.- After that, put the measuring cup on the lid.
3.- Then, put on the lid with a 45º offset (figure 3).
4.- Once the lid is in place, turn it clockwise to secure it. You will hear a "click" to know when it's
properly attached (figure 4).
NOTE:
If the work bowl or lid is not properly installed, the display will show "E1", the safety
micro-switch will not be activated and the machine cannot be started.
1
SPATULA
The silicon spatula has been designed for multiple uses.
1.- To stir food inside the work bowl
2.- As a handle to remove the steamer basket from the work bowl Just insert the handle into the
hole in the basket, fit it into the groove on the handle and pull upwards (figure 2).
BASKET
The steamer basket is designed for several uses.
1.- It can be used to making all kinds of recipes related to steaming (pasta, noodles, steamed
vegetables, etc.).
2.- It can be used as a filter or strainer. Just put the basket in position, close the lid and pour the
juice into a glass. Fruit and vegetables need to be blended with the blades before putting it in,
(figure 2).
76
2
1
1
3
2
2
4