Software Handshaking Xon/Xoff; Activation Of Xon/Xoff; Example With Xon/Xoff; Deactivation Of Xon/Xoff - Leuze electronic LSIS 122 Kurzanleitung

6.4.4 Software Handshaking XON/XOFF

If you want to use the Software Handshake XON/XOFF, you must aktivate it.
XON: [DC3]
XOFF: [DC1]

6.4.4.1 Activation of XON/XOFF

Sending: [STX]999999[ETX]
Recieving: [ACK]
Sending: [STX]115914[ETX]
Recieving: [ACK]
Sending: [STX]999999[ETX]
Recieving: [ACK]
Enable XON/XOFF

6.4.4.2 Example with XON/XOFF:

Sending: [DC3]
Recieving: Data transmission stopped
Reading of an Barcoe with the content '5411153002431'
Triggering with the serial Command DC2 or Hardwaretrigger
Sending: [DC1]
Recieving: [STX] 5411153002431[CR][LF]

6.4.4.3 Deactivation of XON/XOFF

Sending: [STX]999999[ETX]
Recieving: [ACK]
Sending: [STX]115904[ETX]
Recieving: [ACK]
Sending: [STX]999999[ETX]
Recieving: [ACK]
Disable XON/XOFF
(*)
19d oder 13h Tastatureingabe: Alt+019
17d oder 11h Tastatureingabe: Alt+017
Kurzanleitung LSIS 12x-v171e.doc vom 11/03/2010 Seite 21