First Use; Switching The Headphones On/Off; Connecting Headphones - Silvercrest SBKO 4.0 B1 Bedienungsanleitung Und Sicherheitshinweise

First use

Switching the headphones on/off

Switch on the headphones by pressing the multifunction
button (5) for at least 2 seconds. You hear an
ascending tone sequence in the headphones. The LED
(7) flashes orange and thus indicates standby mode. If
the headphones were switched on for the first time and
had never been connected to a device, pairing mode is
started automatically. The LED (7) alternates between
flashing blue and orange in pairing mode. Read the
next section when connecting your device.
Press the multifunction button (5) for at least 3 seconds
to switch off the headphones. You hear a descending
tone sequence in the headphones.

Connecting headphones

Proceed as follows to connect the headphones to your
device:
 Switch off the headphones.
 To start pairing mode, press the multifunction button
(5) for at least 6 seconds until the LED (7) alternates
between flashing blue and orange.
 The headphones are now in search mode. In search
mode, you can connect a compatible device to the
headphones via the Bluetooth
 Then connect your smartphone or audio / media
player to the headphones via Bluetooth
details, please read the instructions of your
SilverCrest SBKO 4.0 B1
®
function.
®
. For further
English - 15