Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
15. Place the casing in position and insert and tighten the casing screws.
Technical data
Torque (Casing)
7.5
Exchange rotor
DANGER
Risk of injury! Risk of electric shock.
▶ The power tool may be operated, serviced and repaired only by trained, authorized personnel. This
personnel must be specially informed of any possible hazards.
1. You will need the following items:
Materials
Rotor
2197108 (110 V)
2197109 (120-127 V)
2197120 (220-230 V)
2197121 (240 V)
Screwdriver (flat)
Screwdriver (combi Torx)
2. Disconnect the electric drill from the electricity supply.
3. Unscrew the casing screws and remove the casing.
4. Remove the carbon brushes. → page 22
5. Remove the chuck from the casing.
6. Remove the motor from the casing.
7. Remove the rotor from the motor and replace it with a new rotor.
8. Insert the motor in the casing.
9. Insert the chuck in the casing.
10. Insert the carbon brushes.
11. Place the casing in position and insert and tighten the casing screws.
Technical data
Torque (Casing)
2180560
*2180560*
Printed: 26.03.2018 | Doc-Nr: PUB / 5367014 / 000 / 04
1.35 Nm ... 1.75 Nm
(1.00 ftlb
... 1.29 ftlb
)
f
f
1.35 Nm ... 1.75 Nm
(1.00 ftlb
... 1.29 ftlb
)
f
f
English
25
Werbung
Inhaltsverzeichnis
