Type Designation; Accessories - Johnson Pump F7B-5001 Bedienungsanleitung

ENGLISH
4. Mount the clutch on the pump shaft
with a key (pos 15).
5. Mount o-ring (F8B) and lip seal
(spring towards the impeller) alt
mechanical seal.
6. Mount the wear plate.
7. Fasten the cam, but before doing so
apply sealing compound to cam and
screw in order to prevent leakage.

Type designation

Pump with impeller neoprene and full cam
Pump type
F7B-5001
F7B-50017
F7B-5001
F7B-50017
F8B-5001
F8B-50017
F8B-50017
F8B-50017
The Part Nos above do not include electromagnetic clutch.
Other variants on request.
Electromagnetic clutch
Voltage
12 V
24 V
12 V
24 V

Accessories

See page 20-21.
6
Part No Connection
10-24577-13 BSP 1"
10-24577-19 NPTF 1"-11
10-24577-99 BSP 1"
10-24577-98 NPTF 1"-11
10-13022-99 BSP 1
10-13022-98 NPTF 1
10-13022-96 NPTF 1
10-13022-95 NPTF 1
Part No Pulley
0.3454.001 2xA
0.3454.002 2xA
0.3454.003 1xB
0.3454.004 1xB
8. Lubricate the impeller with vaseline or
similar and fit it with a rotating move-
ment in the intended direction of
impeller rotation.
9. Fit the gasket alt. the o-ring before
mounting the endcover.
Seal
Lipseal
1
/ Lipseal
2
Mechanical seal
1
/ Mechanical seal
2
1 / " Mechanical seal
2
1 1
/ "-11 / Mechanical seal
2 2
1 1
/ "-11 / Mechanical seal
2 2
1 1
/ "-11 / Mechanical seal
4 2