Citizen CBM1000 Bedienungsanleitung Seite 69

DLE DC4 nmt
[Function]
[Code]
[Range]
[Outline]
[Details]
[Caution]
[Reference]
Outputting specified pulse in real-time.
<10>H<14>H<n><m><t>
n=1, m=0,1
1 t 8
A signal specified with "t" is output to the connector pin
specified with "m".
m
0 Pin No. 2 of drawer Kick-Out Connector
1 Pin No. 5 of drawer Kick-Out Connector
• On-time and off-time are set at t × 100 msec, respectively.
• In case an error occurred during the processing of this
command, the command is ignored.
• In case (ESC p or DLE DC4 under execution), during the
processing of this command the command is ignored.
• This command will be processed as it is received.
• In specification of serial interface, the command is executed
even in offline, reception buffer full and error conditions.
• In specification of parallel interface, this command cannot be
executed while the printer is BUSY.
• This command will be valid, even if specifying the printer is
invalid due to the selection of peripheral units (ESC =).
• If another command with the same data string as this is
received, the printer operates the same way as with this
command. The user should, therefore, be careful.
• The command cannot be inserted in another string of
commands which consist of codes of 2 bytes or more.
ESC p
— 51 —
Connector pin