Citizen CBM1000 Bedienungsanleitung Seite 124

GS V m ......... (1)
GS V m n ..... (2)
[Function]
[Code]
[Range]
[Outline]
[Caution]
Cutting the paper
(1) <1D>H<56>H<m>
(2) <1D>H<56>H<m><n>
(1) m = 1, m = 49
(2) m = 66
0 n 255
Performs the specified paper cutting.
m
1,49 Partial cut (Leaving a bridge area uncut)
Paper feed by "cut position + {n × basic calculation
66
pitch}"and partial cut (Leaving a bridge area uncut)
• In STANDARD MODE, this command only works when it is
entered at the beginning of a line.
For (1):
• A partial cut (Leaving a bridge area uncut) is executed.
For (2):
• If n = 0, the paper is fed to the cut position, and then cut. If n
≠ 0, the paper is fed by "n × basic calculation pitch" inches
past the cut position, and then cut.
• The basic calculation pitch is set by GS P.
The paper feed amount is calculated with the vertical basic
calculation pitch (y).
A fraction resulting from the calculation is corrected with the
minimum pitch of the mechanism, and the remainder is
omitted.
— 106 —
Function