Service; Device Data - Grundfos Conex DIS-C Montage- Und Betriebsanleitung

12.10 Service

The "Service" menu contains service information and
utilities.
The "Service" menu contains the following
options:
•

device data

• analog inputs
• resetting factory settings.
Setup
Service
• Press the [Right] button to open the "Service"
menu.
12.10.1 Device data
1. Press the [Right] button to open the "Product
info" menu.
2. Press the [Up] and [Down] buttons to switch
between the following displays.
Device number
Displays the serial number.
Software status
Software date
M/Y 1.00
Displays the latest revision date of the software
(e.g. 1.00: The software revision status is
January 2000).
Production date
Product. date
M/Y 3.00
Displays the date of manufacture of the device
(e.g. 3.00: The device was produced in March 2000).
28
12.10.2 Analog inputs/test
In this menu, the analog inputs are tested. The input
signals are displayed in mV (analog input 1) and °C
(analog input 2).
1. Press the [Right] button to open the "Analog
input" menu.
2. Press the [Up] and [Down] buttons to switch
between the following displays:
Analog input
Input 1 056 mV
Analog output
Input 2 023 °C
12.10.3 Deleting data/resetting factory settings
In some circumstances it may be necessary to
restore the device to its delivered status. All values
set by the customer are overwritten with the factory
settings.
The initial settings on the device must then be made
again.
Before deleting the memory, make a note
Note
of the important parameter settings.
Delete setting
Press
1. Press the [Right] button to open the "Delete
setting" menu.
2. Simultaneously press and hold down the [Left]
and [Down] buttons.
– "Please wait!!!" is displayed.
Deleting the data takes approximately 10 seconds.
When this display disappears, the Conex
restored to the factory settings.
13. Disposal
This product or parts of it must be disposed of in an
environmentally sound way:
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
®
DIS-C is
Subject to alterations.