Disposal/Environmental Pr Otection; Trouble Shooting; Technical Data; Fault Correction - Parkside PNTS 23 E Bedienungs- Und Sicherheitshinweise

GB
Disposal/Environmental
protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling cen-
tre when you have fi nished with them.
Machines must not be disposed of with
household refuse.
Take the machine to a recycling point. The
waste plastic and metal parts can be sepa-
rated, accurately graded and passed on for
recycling. Contact our Service Centre for
more details.

Trouble shooting

Problem
Device does not start
Low or lack of suction
10

Technical data

Power consumption of motor .............. 1400 W
Mains voltage ........................... 230 V~, 50 Hz
Safety class ...............................................
Protection category ..................................IP24
Suction force .....................16 kPA, 2.2 m
Cable length .............................................. 4 m
Stainless steel container capacity (brutto) .......23 l
Useful container volume ...................................15 l
Weight (incl. all accessories) ................. 6.5 kg
Technical and visual modifi cations may be
carried out due to further development with-
out prior notice. All dimensions, information
and statements provided in these Operating
Instructions are therefore subject to amend-
ment. Legal claims which are based on the
Operating Instructions can therefore not be
recognised.
Possible cause
Mains voltage is not
present
Defective on/off switch
Worn carbon brushes
Defective motor
Hose system or jets blocked Remove obstructions and blockages
Suction pipes assembled
incorrectly
Container open
Container full
Filter full or clogged

Fault correction

Check plug socket, cable, line,
plug and fuse, where appropriate,
repair through electrical specialist
Repair through customer service
Assemble suction pipes correctly
Close container
Empty container
Empty, clean or replace fi lter
II
3
/min