Importer; Troubleshooting - UNITED OFFICE UAV 380 A1 Bedienungsanleitung

Importer

KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
www.kompernass.com

Troubleshooting

If the material to be shredded jams:
This means that you have attempted to feed too
much material into the appliance
(max. 7 sheets 80g/m
max. 1 CD/DVD).
w
• Place the switch
to be shredded become jammed. The appliance
now goes into reverse and the material to be
shredded is returned.
w
• Place the switch
soon as the jammed item is returned.
If the appliance suddenly ceases operation:
This means that the appliance has overheated and
the automatic safety cut-out has activated itself.
Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance
paper, max. 1 credit card,
2
in position should the item
in position (OFF), as
• To switch the appliance off, move the switch
into the middle position
• Allow the appliance to cool down.
• Reinsert the power plug into the socket.
• Switch the appliance on, in that the switch
is placed in the position
If the appliance doesn`t allow itself to be
switched on:
• Check that the plug is correctly connected to a
wall socket.
• Try out a different wall socket.
• The appliance is probably defective. Have the
appliance checked by qualified specialists.
When the appliance is switched on,
however, the shredding process will not start:
• The appliance has overheated and triggered the
automatic safety switch-off.
Important: Remove the power plug from the
wall socket to avoid an unintended starting of
the appliance.
• To switch the appliance off, move the switch
into the middle position
• Allow the appliance to cool down.
• Replace the power plug into the socket.
• Switch the appliance on, in that the switch
is placed in the position
The cutter attachment
• Place the cutting attachment
position.
- 6 -
(OFF).
.
(OFF).
.
q
is not correctly placed.
q
in the correct
w
w
w
w