Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Specifications
Mounting and electric connection may be executed by qualified personnel only according to the
current standards and regulations. Please see the ID label attached to the motor for additional
information. Also see detailed specifications and fan characteristics for each type at
www.fancom.com/uk/downloads or the Fancom extranet.
By default, the jumper settings are set to overrule the I/O-net controlled I-fan units via the I/O network (1-10V). To
overrule the analogue control I-fan units, the jumper settings must be changed to 0-10V / 10-0V. Do this as
follows:
1.
Replace the jumper with resistance with the jumper delivered as a standard.
2.
Set the jumper to the proper position:
Gndf
g
10
Werbung
Inhaltsverzeichnis
