OJ Electronics ETO2 Bedienungsanleitung Seite 5

ETO2
Select if outdoor sensor ETF is connected terminals 31-32.
If none sensor ETF is connected, OFF must be selected. Press encoder button for OK.
Select the application type by turning the encoder button and pressing OK.
ELECTRIC 1-ZONE : 1 zone electric heating control.
ELECTRIC 2-ZONE : 2 zones individual electrical heating control.
ELECTRIC 2-STEP : 2 stage electric heating control (Y/Δ) for 1 zone
WATERBASED : 1 zone waterbased heating control
Select the appropriate option and press OK. The system is now set up and will begin operating fully
automatically in accordance with the pre-configured standard program, see FACTORY SETTINGS.
Alternative settings can also be made, see SETTINGS.
Status and afterheat data for zones 1 and 2 are now shown on the display.
English
5