OJ Electronics ETO2 Bedienungsanleitung Seite 11

ETO2 English
Zone 2 temperature can be calibrated in the same way here. Adjust the
necessary offset using the encoder button and press OK.
Outdoor temperature can be calibrated here. The temperature recorded by the
ETF outdoor sensor can be adjusted so that the exact temperature is displayed
on ETO2. Measure the temperature beside the sensor using a thermometer.
Adjust the necessary offset using the encoder button. Press OK.
The minimum return water temperature can be set here. Set the required
minimum temperature and press OK.
This menu option is only available when water-based heating is used.
The maximum supply water temperature can be set here. Set the required
maximum temperature and press OK.
This menu option is only available when water-based heating is used.
All ETO2 factory settings can be restored here. Selecting this option deletes all
customised settings.
11