Inhaltsverzeichnis
Werbung
❋
VARI
LITE - VL440 / VL770 / VL880 L
Power and Data Cabling Requirements
Power
The luminaire requires standard AC power distribution from 100-240 VAC, 50/60 Hz. Current
required depends on the AC supply voltage and product model. Refer to
page 14
for all models covered in this manual.
Note: The mating Neutrik PowerCon connector is supplied, however, you will need to purchase or
construct a cable appropriate for your application.
AC Power Input
3-Pole Neutrik PowerCon
Locking Connector for AC
Input Power
Depending on the application, the luminaire's AC input cable may require a different connector. If
required, install a new connector meeting your requirements using the following wire color code
reference:
12
U
'
M
UMINAIRE
SER
S
Neutrik PowerCon
Connector (supplied)
Figure 2-1: Power Connector
Wire*
Green/Yellow
Blue
Brown
* International (Harmonized) Standard
31 Octo be r 20 13
ANUAL
"Current vs. Voltage" on
Connection
AC Ground
AC Neutral
AC Line
02 .9 687 .00 01 C
Werbung
Inhaltsverzeichnis
Fehlerbehebung
