Fixture Color Control Operation - Color Snap; Fixture Control Operation - Fixture Reboot - Philips VARI LITE 400 series Handbuch

Fixture Color Control Operation - Color Snap

A COLOR SNAP feature has been added in the control channel. COLOR SNAP controls how the
CYM color filter wheels travel when a command is given.
Depending where the wheels are positioned, they will travel, with COLOR SNAP enabled in the
Control Channel, the shortest distance to the new color value.
• The timing channel data should change as a snap.
• A zero value will give the fastest move.
• A color change time of zero will move the color wheels via the quickest path to their new value.

Fixture Control Operation - Fixture Reboot

A fixture REBOOT command is included to the control channel. When the FULL LUMINAIRE
REBOOT command is executed from the control channel the lamp will be doused, the luminaire will
completely shut down, and a restart signal will be given to the luminaire's Main Control Board (MCB).
Note: REBOOT should not be confused with RECAL command. REBOOT is a hard reset of the
fixture which shall completely shutdown and restart the Luminaire (just like recycling luminaire
power). The RECAL command will signal the luminaire to go through it recalibration routine.
02.96 87.000 1 C
O
31 Octo be r 20 13
: DMX O
PERATION PERATION
3
37