Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
Philips VARI LITE VLX Wash Luminare Handbuch
  1. Anleitungen
  2. Marken
  3. Philips Anleitungen
  4. Lichtanlage
  5. VARI LITE VLX Wash Luminare
  6. Handbuch

Philips VARI LITE VLX Wash Luminare Handbuch

Vorschau ausblenden
Inhaltsverzeichnis

Werbung

Quicklinks

Werbung

Inhaltsverzeichnis
loading

Verwandte Anleitungen für Philips VARI LITE VLX Wash Luminare

Inhaltszusammenfassung für Philips VARI LITE VLX Wash Luminare

  • Seite 2 Vari-Lite assumes no responsibility or liability for any errors or inaccuracies that may appear in this manual. All information and graphics are property of Vari-Lite, a Philips group company, 10911 Petal Street Dallas, Texas 75238 USA. Version as of: 07 August 2009 (Preliminary) Part number: 02.9690.0001 0...
  • Seite 3 OREWORD How To Obtain Warranty Service A copy of the Vari-Lite Limited Warranty was included in the shipping package for this VARI❋LITE® product. To obtain warranty service, please contact customer service at 1-877-VARI-LITE (1-877-827-4548), +1-214-647-7880, or customerservice@genlytecontrols.com and request a Return Material Authorization (RMA) for warranty service.
  • Seite 4 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Compliance Notice This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when this equipment is operated in a commercial environment.

  • Seite 5: Safety Notice

    OREWORD Safety Notice It is extremely important to read ALL safety information and instructions provided in this manual and any accompanying documentation before installing and operating the products described herein. Heed all cautions and warnings during installation and use of this product. Safety symbols used throughout this manual are as follows: CAUTION advising of potential damage to product.
  • Seite 6 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL WARNING: INSTRUCTIONS FOR CONTINUED PROTECTION AGAINST EXCESSIVE EXPOSURE TO UV RADIATION 1. Many VARI❋LITE® luminaires use a lamp that produces UV radiation. DO NOT look directly at lamp. 2. It is hazardous to operate luminaires without lens or shield. Shields, lenses, or ultraviolet screens shall be changed if they have become visibly damaged to such an extent that their effectiveness is impaired.

  • Seite 7: Sicherheitshinweise

    OREWORD Sicherheitshinweise Es ist äußerst wichtig, ALLE Sicherheitsinformationen und -hinweise in diesem Handbuch und dem beiliegenden Informationsmaterial zu lesen, bevor Sie die hierin beschriebenen Produkte installieren bzw. bedienen. Halten Sie bei der Installation und dem Einsatz dieses Produkts alle Warnhinweise und Vorsichtsmaßnahmen ein.
  • Seite 8 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL WARNUNG: HINWEISE ZUM SCHUTZ GEGEN ÜBERHÖHTE UV-STRAHLUNG 1. Viele VARI❋LITE®-Scheinwerfer verwenden die Lampentyp, der UV-Strahlen abgibt. SCHAUEN SIE NICHT direkt in die Lampe. 2. Es ist gefährlich, Leuchten ohne Linsen oder Blenden zu bedienen. Blenden, Linsen oder Ultraviolettschirme müssen ausgetauscht werden, sofern deren Schutzwirkung durch sichtbare Beschädigung (z.
  • Seite 9 OREWORD Notes de sécurité Avant de procéder à l’installation des produits décrits dans ce guide et de les mettre en marche, il est extrêmement important de lire TOUS les renseignements et TOUTES les directives de sécurité contenues dans ce guide ainsi que toute documentation jointe. Tenir compte de tous les avertissements et suivre toutes les précautions pendant l’installation et l’utilisation de cet appareil.
  • Seite 10 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL AVERTISSEMENT: DIRECTIVES POUR SE PROTÉGER CONTRE UNE EXPOSITION EXCESSIVE AUX RAYONS UV 1. Plusieurs luminaires VARI❋LITE® utilisent une lampe qui produit des rayons UV. NE PAS fixer son regard sur la lampe. 2.
  • Seite 11 OREWORD Aviso sobre Seguridad Es muy importante leer TODA la información e instrucciones sobre seguridad que se indica en este manual así como en los documentos adjuntos antes de instalar y operar los productos descritos. Se debe prestar atención a todos los avisos y advertencias durante la instalación y uso de este producto. Los símbolos de seguridad usados en este manual son los siguientes: CUIDADO, indica posibles daños al producto.
  • Seite 12 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL ADVERTENCIA: INSTRUCCIONES PARA PROTECCIÓN CONTINUA CONTRA LA EXPOSICIÓN EXCESIVA DE RADIACIÓN ULTRA VIOLETA 1. Muchas luminarias VARI❋LITE® usan un tipo de lámpara que produce radiación UV. NO mire directamente a la lámpara. 2.
  • Seite 13 OREWORD 02.96 90.000 1 0 07 Au gu st 2009 (Pre limina ry)
  • Seite 14 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL 07 Au gu st 2009 (Pre limina ry) 02 .9 690.00 01 0...

  • Seite 15: Inhaltsverzeichnis

    ABLE OF ONTENTS Table of Contents Introduction About This Manual ........................1 Additional Documentation......................1 Text Conventions ........................2 Customer Service ........................2 Chapter 1. Description Features Standard Features ........................4 Components Included Items........................... 5 Replacement Items/Accessories....................5 Luminaire Overview ......................... 6 Chapter 2.
  • Seite 16 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Strobe..........................27 Beam Spreader........................27 Focus Time ........................27 Beam Time ........................27 Luminaire Movement......................28 Luminaire Pan ........................28 Luminaire Tilt........................28 Luminaire Timing Timing Channel Information....................29 Updating Software USB Download and Programming ..................

  • Seite 17: About This Manual

    NTRODUCTION BOUT ANUAL Introduction About This Manual This manual provides necessary information regarding safety, installation, operation and routine maintenance for the VARI❋LITE® VLX™ Wash Luminaire. Familiarizing yourself with this information will help you to get the most out of your luminaire. WARNING: It is important to read ALL accompanying safety and installation instructions to avoid damage to the product and potential injury to yourself or others.

  • Seite 18: Text Conventions

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Text Conventions The following styles and meanings are used throughout this manual: Style Meaning [Button] Front panel button. Example: Press [Enter] or [ESC] (Escape). [Up] / [Down] / [Left] / [Right] Press either [Up] or [Down] or [Left] or [Right] arrow Arrows button at Menu Display.
  • Seite 19 HAPTER Description This chapter contains descriptions of luminaire features and components, along with a list of accessories that are available. • Features • Components 02.96 90.000 1 0 07 Au gu st 200 9 (Pr elimina ry)

  • Seite 20: Features

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Features Standard Features All VLX™ Wash Luminaires have the following standard features: • Seven, 90-watt RGBW CBM380 LED chipsets.* Each chip set contains high density red, green, blue, and white LED emitters. •...

  • Seite 21: Components

    ESCRIPTION OMPONENTS Components Included Items The following illustration shows all items included with the luminaire: Included Items Wash Luminaire Vari-Lite Customer Service Unpack & Quick CD ROM (User’s Manual) Product Support Sheet Start Sheet Warranty Card Product Registration Card Neutrik PowerCon® AC Input Connector* Vari-Lite QA Certificate Mounting Brackets...

  • Seite 22: Luminaire Overview

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Luminaire Overview The following illustration shows the external luminaire components and controls. Head Assembly Houses light source lens assemblies. Backcap Assembly Provides access to light source and assemblies. Front Lens Assembly Yoke Assembly Houses Master Control Board (MCB).
  • Seite 23 ESCRIPTION OMPONENTS Luminaire Overview (continued) Upper Enclosure Menu Status LEDs Power State, Data LCD Display Transmit, Data Displays all Data and Luminaire Settings Receive, Data Error POWER ENTER ERROR Escape (ESC) To Exit or Go to Previous Menu Item Enter Button Arrow Keys (Left/Right/Up/Down) To Select or Change a To Menu Navigate Menu Options and make Data...
  • Seite 24 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Notes 07 Au gu st 2009 (Pre limina ry) 02 .9 690.00 01 0...
  • Seite 25 HAPTER Installation This chapter contains instructions for installation of the luminaire. It includes connecting power and data, along with instructions for powering up the luminaire for the first time and addressing it within your system. • Power and Data Cabling Requirements •...

  • Seite 26: Power And Data Cabling Requirements

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Power and Data Cabling Requirements AC Power WARNING: DO NOT connect to three-phase Delta service in countries with 240 volt power. WARNING: DO NOT connect or disconnect energized power cable at fixture (under load). Turn off circuit breaker (or completely de-energize circuit) before connecting or disconnecting power cable at fixture.

  • Seite 27: Current Vs. Voltage

    NSTALLATION OWER AND ABLING EQUIREMENTS Current vs. Voltage The following tables provide the luminaire’s current draw at specific voltages. Table 2-1: VLX Wash Luminaire - Current vs. Voltage* Voltage (VAC) @ 60Hz Current (A) *Currents given are worst case with all motors sequencing. 02.96 90.000 1 0 07 Au gu st 2009 (Pre limina ry)

  • Seite 28: Data Cables

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Data Cables The VLX™ Wash Luminaire is equipped with two, 5-pin XLR connectors for DATA IN and DATA THRU (out) applications. DATA IN requires a 5-pin, female XLR connector and DATA THRU requires a 5-pin, male XLR connector.

  • Seite 29: Recommended Cable Types/Manufacturers

    NSTALLATION OWER AND ABLING EQUIREMENTS Recommended Cable Types/Manufacturers These are only a few of the suitable cable types. Any quality EIA485, twisted pair, 120 ohm, shielded cable will also work. Table 2-2: Recommended Cable Types ∗ Type Pairs Jacket Temp (F) ZΩ...

  • Seite 30: Installation Procedures

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Installation Procedures Hanging the Luminaire The VLX™ Wash Luminaire can be hung horizontally or vertically from any structure designed to work with the type of load created by this moving luminaire. Two mounting bracket assemblies (provided) are used to attach truss hooks or other mounting hardware as required.
  • Seite 31 NSTALLATION NSTALLATION ROCEDURES Step 3. While pulling up on locking mechanism release, fit keyed holes onto raised mounting buttons at bottom of enclosure. Slide forward and release locking mechanism to lock in place. Ensure brackets are locked securely. (Always face brackets in same direction as shown.) WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is installed on the luminaire.
  • Seite 32 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Installing in Truss: Step 1. Using two people, lift luminaire into mounting position. Step 2. Secure in place with truss hook. Ensure truss hook hardware that locks hook in place (e.g. wing bolt) is properly tightened and that luminaire is fully supported.

  • Seite 33: Floor Mounting The Luminaire

    NSTALLATION NSTALLATION ROCEDURES Floor Mounting the Luminaire The luminaire enclosure is sufficient to stabilize the luminaire in a floor installation, provided that the mounting surface is flat and sturdy. Also, the area around the luminaire must be free of debris and moisture. Connecting Data and Power A maximum of 32 luminaires may be connected in any one DMX data link.

  • Seite 34: Powering Up

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Powering Up Power Up and Configuration Procedure When AC power is initially applied, the luminaire immediately begins a calibration sequence that steps it through pan and tilt movements. The beam mechanism also moves through a full range of motion. After calibration, the luminaire head either stops at its “home”...

  • Seite 35: Addressing

    NSTALLATION DDRESSING Addressing Program Starting Address The address setting for DMX console controlled systems is entered using the Menu Display (refer to “Menu Operation” on page 42). The luminaire retains the DMX address even when power is removed. Note: Refer to your console operating instructions for specific information regarding its addressing requirements.
  • Seite 36 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Notes 07 Au gu st 2009 (Pre limina ry) 02 .9 690.00 01 0...
  • Seite 37 HAPTER Operation This chapter contains instructions for operating the luminaire using DMX control and for updating the internal software. • DMX Operation • DMX Mapping • Luminaire Timing • Updating Software 02.96 90.000 1 0 07 Au gu st 200 9 (Pr elimina ry)

  • Seite 38: Dmx Operation

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL DMX Operation Channel Mapping These tables assume a DMX start address of 1. When a different starting address is used, this address becomes channel 1 function and other functions follow in sequence. Table 3-1: VLX™...
  • Seite 39 : DMX O PERATION PERATION Table 3-1: VLX™ Wash Luminaire Mapping Mode 1 Beam Time 0 - 255 0 - 100% Allows for luminaire timing of zoom. Pro- file should default to DMX 255 for smooth- est console fade times. Control 0 - 255 0 - 100%...

  • Seite 40: Control Channel Functions

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Control Channel Functions Used to set different modes, parameters, and functions of the VLX™ Wash Luminaire. Set control channel value for desired action. Hold value for at least 3 seconds. Set control channel value to 0 without any scaling. Discrete values must be used; not manual controls such as faders or encoders (see chart below for values).

  • Seite 41: Dmx Mapping

    : DMX M PERATION APPING DMX Mapping Color & Intensity Control The luminaire’s color system is composed of a color mixing seven 90-watt RGBW LEDs. The following sections describe these components. Color Mixing All color mixing is accomplished via the luminaire’s seven 90-watt RGBW LEDs using 16-bit control. Table 3-3: DMX Map for Color Mixing - Red LEDs DMX Channel % Value...

  • Seite 42: Led Intensity Control

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL LED Intensity Control Provides 16-bit control of LED intensity settings. Table 3-7: DMX Map for LED Intensity DMX Channel % Value DMX Value Action 1 (High Byte) 0 - 100 0 - 65535 16-bit control for Intensity of LED settings 2 (Low Byte)

  • Seite 43: Beam Control

    : DMX M PERATION APPING Beam Control Strobe Table 3-9: DMX Map for Strobe DMX Channel % Value DMX Value Action 0 - 100 Open Closed Slow Random 8-10 Medium Random 11-12 Fast Random 13 - 255 (fastest) Strobe Range Beam Spreader Table 3-10: DMX Map for Beam Spreader DMX Channel...

  • Seite 44: Luminaire Movement

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Luminaire Movement Luminaire Pan 16-bit control of luminaire pan operation. Table 3-13: DMX Map for Luminaire Pan Operation DMX Channel % Value DMX Value Action 3 (High Byte) 0 - 100 0 - 65535 16-bit control of Pan - 540 degrees of movement (default =...

  • Seite 45: Luminaire Timing

    PERATION UMINAIRE IMING Luminaire Timing Timing Channel Information Timing channel control improves the timed moves of certain groups of parameters. We provide up to four timing channels, one for focus (Pan and Tilt), one for color parameters, one for beam parameters, and one for gobo wheel position (spot version only).
  • Seite 46 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Note: The particular storing syntax for your console, as well as instructions on how to write part cues, can be found in the operation manual for that console. To use these channels, you must: Step 1.
  • Seite 47 PERATION UMINAIRE IMING Timing channels can be set in either % or 0-255 (DMX) modes, with the following values assigned: Timing Channels Map Table 3-16: % Value = Seconds Full Speed 02.96 90.000 1 0 07 Au gu st 2009 (Pre limina ry)
  • Seite 48 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Timing Channels Map Table 3-16: (Continued) % Value = Seconds 10.2 10.4 10.6 07 Au gu st 2009 (Pre limina ry) 02 .9 690.00 01 0...
  • Seite 49 PERATION UMINAIRE IMING Timing Channels Map Table 3-16: (Continued) % Value = Seconds 02.96 90.000 1 0 07 Au gu st 2009 (Pre limina ry)
  • Seite 50 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Timing Channels Map Table 3-16: (Continued) % Value = Seconds 07 Au gu st 2009 (Pre limina ry) 02 .9 690.00 01 0...
  • Seite 51 PERATION UMINAIRE IMING Timing Channels Map Table 3-16: (Continued) % Value = Seconds 02.96 90.000 1 0 07 Au gu st 2009 (Pre limina ry)
  • Seite 52 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Timing Channels Map Table 3-16: (Continued) % Value = Seconds 07 Au gu st 2009 (Pre limina ry) 02 .9 690.00 01 0...
  • Seite 53 PERATION UMINAIRE IMING Timing Channels Map Table 3-16: (Continued) % Value = Seconds Follows Cue Data 02.96 90.000 1 0 07 Au gu st 2009 (Pre limina ry)

  • Seite 54: Updating Software

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Updating Software USB Download and Programming To download files with a PC equipped with a Universal Serial Bus (USB) port, you need the VARI❋LITE® USB Luminaire Programming Kit (28.8500.0054). The USB Luminaire Programming Kit can be ordered directly from your Authorized VARI❋LITE®...

  • Seite 55: Transferring Software From Luminaire To Luminaire

    PERATION PDATING OFTWARE Lists specific versions of downloaded software (on PC) Device Connection Status and USB Downloader Controls Click to download specific software version to connected luminaire(s) Click logo to go to Vari-Lite web site (internet connection required) Download History Will show current progress of download Figure 3-1: VL Download Program Window...
  • Seite 56 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL A termination connector is used in this process. Refer to page 13 for more information regarding the construction of this connector. Master luminaire containing Luminaire 1 Luminaire 2 software version to download requiring update requiring update Data Thru...
  • Seite 57 HAPTER Menu System This chapter contains instructions for operating the luminaire using the Menu Display feature. • Menu Operation • Menu Functions 02.96 90.000 1 0 07 Au gu st 200 9 (Pr elimina ry)

  • Seite 58: Menu Operation

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Menu Operation What Is the Menu System? The menu system is a programmable set of commands used to configure, address, operate, and test the luminaire. The menu system is controlled at the Menu Display available at the enclosure input panel. Menu Display Enclosure Input Panel Figure 4-1: Menu Display Location...
  • Seite 59 YSTEM PERATION Table 1-1: Menu Control Buttons Button Description Action Up Arrow Menu Navigation / Data Selection Down Arrow Menu Navigation / Data Selection Right Arrow Menu Navigation / Data Selection Left Arrow Menu Navigation / Data Selection Enter Button To Select or Change a Setting or Data Value ENTER Used to Access Main Menu Parameters, Exit, or...

  • Seite 60: Default State

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL To enter the menu system, first press [ESC]. The functions displayed will be 1st level functions. Scroll through the 1st level functions by pressing [Up] / [Down] arrows. Once the desired function appears in the display, press [Enter].

  • Seite 61: Menu Functions

    YSTEM UNCTIONS Menu Functions Menu System Overview The following is a graphic representation of the entire VLX™ Wash Luminaire menu system. Address value (1 thru 512) Fixture Status scrolls errors or displays OK ReCal Version XX/XX/XX Configure Mode A Pan/Tilt Speed Fixt Hrs # of hours...

  • Seite 62: Menu System Function Chart

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Menu System Function Chart The following is a detailed look at the internal menu system. Table 4-1: VLX Wash Menu System Chart 1st Level 2nd Level 3rd Level 4th Level 5thLevel Address XXX value 1 thru 512 Configure...
  • Seite 63 YSTEM UNCTIONS Table 4-1: VLX Wash Menu System Chart 1st Level 2nd Level 3rd Level 4th Level 5thLevel Fixture Status Status/Error Display Scrolls error messages or displays OK Re Cal Recalibrate fixture OK? Asks (confirms) to execute recalibration of fixture Version Version MM/DD/YY (Page 1) HH:MM (Page 2)

  • Seite 64: Menu Function Definitions

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Menu Function Definitions For easy reference, each possible menu item is listed alphabetically in the first column by its display abbreviation. The second column follows with a definition of the abbreviation and then a third column provides an explanation of its purpose and function.
  • Seite 65 YSTEM UNCTIONS Table 4-2: Menu Function Definitions (Continued) Display Definition Purpose Inv Pan Invert Pan Reverses pan action for special focus requirements. Inv Tilt Invert Tilt Reverses tilt action for special focus requirements. LED Cor- LED Calibra- Sets LEDs to factory calibration level. rection tion Level LED Setup...
  • Seite 66 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Table 4-2: Menu Function Definitions (Continued) Display Definition Purpose Test Test Accesses diagnostic tests for internal mechanisms or assemblies. Tilt Tilt Specifies tilt function for manual control (Manual) or testing (Test). Version Version Displays current software version date and time (in two pages).

  • Seite 67: Troubleshooting And Maintenance

    PPENDIX Troubleshooting and Maintenance This appendix provides instructions for troubleshooting and routine maintenance which may be necessary during the life of the luminaire. • Troubleshooting • Routine Maintenance WARNING: All routine maintenance procedures are to be performed with power completely removed from the luminaire.

  • Seite 68: Error Messages

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Troubleshooting Error Messages If a problem occurs during luminaire calibration, at the end of the calibration sequence the Menu Display cycles through any applicable error message(s) until the end of the list is reached. To review the error messages again, re-access them using the Status function.

  • Seite 69: Troubleshooting Guide

    ROUBLESHOOTING AND AINTENANCE Troubleshooting Guide If a problem is suspected, first try recalibrating the luminaire to prompt an error message. The chart below provides possible causes and remedies for various error messages and/or symptoms. WARNING: All service and maintenance (including troubleshooting), other than described herein should be performed by an Authorized VARI❋LITE Dealer or Service Center.

  • Seite 70: Routine Maintenance

    ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Routine Maintenance Introduction Being a solid-state fixture, and unlike most automated arc or tungsten fixtures, the VLX™ Wash Luminaire requires very little routine maintenance by the user. This section covers all the parts or assemblies that can be removed, cleaned, and checked by the user.

  • Seite 71: Front Lens Removal And Cleaning

    ROUBLESHOOTING AND AINTENANCE Front Lens Removal and Cleaning Tools: • #2 Phillips screwdriver • Slotted Screwdriver • Refer to the list of cleaning materials in “Special Cleaning and Care Instructions” on page 54 WARNING: Ensure that power is completely removed from luminaire before attempting any work. Always wear eye protection and proper gloves when performing this procedure.
  • Seite 72 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Step 4. Gently slide front head cover over optic assembly and set aside. Step 5. Remove protective EMI shields from around optics assembly as shown in Figure A-2 follows: WARNING: On one EMI shield, it is imperative to identify the ambient temperature sensor that protrudes through the EMI protective shield (it is on the opposite side where the front cover safety tether connects.
  • Seite 73 ROUBLESHOOTING AND AINTENANCE 6-32 x 1/4" PPB Screws (x3) Front Lens Ring Zoom Slide Standoffs (x3) Front Lens Compression Springs (x3) Optics Ring Plate Optics (CPC) Lenses Figure A-3: Front Lens Removal Note: Before proceeding, please note orientation of both front lens ring and front lens assembly. They must be mounted in their original orientation/position for the front head cover to reinstall properly.
  • Seite 74 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Step 8. Once cleaning is complete, reassemble by performing Steps 6 through 2 in reverse order. Be sure to orient front lens as shown in Figure A-4. WARNING: Front Lens Assembly must be mounted in orientation show. If installed incorrectly, luminaire performance will be affected.

  • Seite 75: Beam Spreader Removal For Fixed Beam Applications

    ROUBLESHOOTING AND AINTENANCE Beam Spreader Removal for Fixed Beam Applications Tools: • #2 Phillips screwdriver • Slotted screwdriver WARNING: Ensure that power is completely removed from luminaire before attempting any work. Always wear eye protection and proper gloves when performing this procedure. To remove beam spreader assembly for fixed beam applications: Step 1.
  • Seite 76 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL Step 5. Remove protective EMI shields from around optics assembly as shown in Figure A-2 follows: WARNING: On one EMI shield, it is imperative to identify the ambient temperature sensor that protrudes through the EMI protective shield (it is on the opposite side where the front cover safety tether connects.
  • Seite 77 ROUBLESHOOTING AND AINTENANCE Step 6. At head assembly, as shown in Figure A-3, remove front lens assembly as follows: 6-32 x 1/4" PPB Screws (x3) Front Lens Ring Zoom Slide Standoffs (x3) Front Lens Compression Springs (x3) Optics Ring Plate Figure A-7: Front Lens Removal a.
  • Seite 78 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL 6-32 x 1/4" PPB Screws (x3) Optics Ring Plate Compression Springs (x3) Optics (CPC) Lenses (x7) Optics Assembly Posts (x3) Figure A-8: Fixed Beam Application Assembly a. As shown in Figure A-8, slide compression springs over optics assembly posts.

  • Seite 79: Technical Specifications

    PPENDIX Technical Specifications VLX™ Wash Luminaire PROGRAMMABLE FUNCTIONS Color Mixing System Seven x 90 watt RGBW CBM380 LED chipsets*. * Each chipset contains high density red, green, blue, and white LED emitters. Zoom Optics Patented optical zoom system with continuously variable field angle from approximately 23°...
  • Seite 80 ❋ VARI LITE® - VLX™ W ’ UMINAIRE ANUAL PHOTOMETRIC Zoom LED Mode Field Angle Lumens Narrow RGBW 12244 9272 22.9 Wide RGBW 10857 8523 57.8 Without Lens Array RGBW 13922 8866 21.9 OPERATIONAL Power Requirements Standard AC power distribution from 100-240 VAC, 50/60 Hz. The fixture requires up to 9 A depending on the AC supply voltage.
  • Seite 82 Vari-Lite 10911 Petal Street Dallas, Texas 75238 USA 1-877-VARI-LITE ❋ 1-214-647-7880 www.vari-lite.com. ©2009 Vari-Lite, a Philips group company. All Rights Reserved.

Inhaltsverzeichnis