Rotating Gobo Removal And Installation - Philips VARI LITE 400 series Handbuch

❋
VARI LITE - VL440 / VL770 / VL880 L

Rotating Gobo Removal and Installation

WARNING: Remove power from luminaire before performing this procedure.
Note: VL440 / VL770 / VL880 Luminaires accept glass gobos only. Use of metal gobos in these
luminaires may damage gobo assembly and will void the luminaire warranty.
To remove and replace rotating gobos:
Step 1. Remove power from luminaire and allow luminaire to cool completely.
Step 2. As illustrated in
two captive quarter-turn fasteners and sliding cover away from luminaire head. Note, rear
head cover is attached by a safety tether.
Fixed Gobo
Assembly
Fixed Color
Filter Assembly
* Rear head cover assembly secured with a tether.
86
U
UMINAIRE SER
Figure A-7, at rear cover assembly, remove rear head cover by loosening
Luminaire Head
Assembly
Rotating Gobo
Assembly
Figure A-7: Replacing Rotating Gobos
31 Octo be r 20 13
' M
S ANUAL
Rear Head Cover
Assembly*
Quarter-Turn
Fasteners
02 .9 687 .00 01 C