Safety And Compliance; Electromagnetic Fields (Emf) - Philips HF3650 Bedienungsanleitung

General

Safety and compliance

Electromagnetic fields (EMF)

- The appliance has no on/off switch. To disconnect the appliance,
remove the adapter from the socket-outlet. The adapter and socket-
outlet shall remain easily accessible at all times.
- This appliance is only intended for household use, including similar use
for instance in hotels.
- No naked flame sources, such as lighted candles, should be placed on
the appliance.
- The LEDs inside this Wake-Up Light are not replaceable, when they
reach their end of life the whole Wake-Up Light shall be replaced.
- If you often wake up too early or with a headache, reduce the set light
intensity level and/or the set sunrise simulation time.
- If you often wake up by the alarm sound, increase the set light intensity
level or the set sunrise simulation time.
- If you share a bedroom with someone else, this person may
unintentionally wake up from the light of the appliance, even though
this person is further removed from the appliance. This phenomenon is
the result of differences in light sensitivity between people.
- The power consumption of the appliance is lowest if no device is
connected to the USB port and the lamp, radio and display are turned
off.
This appliance meets the safety requirements in the EU for:
- IEC 60598: Luminaires.
- IEC 62368: Audio/video, information and communication technology
equipment.
- IEC 62471: Photobiological safety of lamps and lamp systems.
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
English
9