Function Definitions - Philips VARI LITE 400 series Handbuch

❋
VARI LITE - VL440 / VL770 / VL880 L

Function Definitions

Each menu item is listed in the first column by its display abbreviation. The abbreviations appear in
alphabetical order as opposed to their position in the menu display sequence for easy reference.
Display
10Min
30sec
5Min
Address
ALL SEQ
Beam Iris
Cal ON
ChgLu-
mID
Config
ColorMix
ColrWhl
Chan XX
Cyan
Data
Dimmer
Disable
Display
DMX
Download
Edge
Enable
Encoder
FAIL
FixCol-
Whl
FixGobo
Fixt Hrs
Fixture
70
UMINAIRE
Table 4-2: Menu Function Definitions
Definition Purpose
10 Minutes Sets Menu Display to automatically shut off after 10 minutes of non-use.
30 Seconds Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Minutes Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address Accesses functions for setting luminaire starting address in DMX ( DMX ) controlled
systems.
All Sequence Performs all tests in sequential order.
Beam Iris Specifies beam iris function for manual control ( Manual ) or for testing ( Test ).
On after Calibration Configures arc luminaire so that lamp will strike after calibration procedure is com-
plete.
Change the luminaire Allows access to change or set the luminaire ID number.
ID number
System Configuration Accesses functions for setting lamp start up, pan/tilt, Menu Display, changing
luminaire ID, and resetting luminaire default values.
Crossfade Color Specifies crossfade color wheels for testing ( Test ).
Wheels
Color Wheel Specifies fixed color wheel for testing ( Test ).
DMX Channel Specifies DMX channel for display of current data value.
Cyan Color Wheel Specifies Cyan color wheel for manual control ( Manual ) or for testing ( Test ).
DMX Data Accesses function for displaying DMX data by channel number.
Dimmer Specifies dimmer mechanism for manual control ( Manual ) or for testing ( Test ).
Disable Disables a function.
Display Illumination Accesses options for Menu Display on and off times.
DMX Accesses functions for setting DMX Data or pan/tilt options.
Download Downloads program to luminaires.
Edge Motor Specifies edge function for manual control ( Manual ) or for testing ( Test ).
Enable Enables a function.
Encoders Accesses pan or tilt encoder for diagnostic testing ( Test ).
Test Fail Indicates that sensor test has failed.
Fixed Color Wheel Specifies fixed color wheel for manual control ( Manual ).
Fixed Gobo Specifies fixed gobo wheel for manual control ( Manual ) or for testing ( Test ).
Fixture Hours Displays total number of hours luminaire has been powered on.
Fixture Access luminaire specification information such as software version, along with sta-
tus information and download function.
31 Octo be r 20 13
U ' M
SER S ANUAL
02 .9 687 .00 01 C