Installation Instructions - HANSGROHE Focus E2 Gebrauchsanleitung, Montageanleitung


Safety Notes
Gloves should be worn during installation to prevent

crushing and cutting injuries.
The shower system may only be used for bathing,

hygienic and body cleansing purposes.
The hot and cold supplies must be of equal pressu-

res.

Installation Instructions

• The fitting must be installed, flushed and tested after
the valid norms.
• The mixer can not used together with a continuous
flow water heater.
Technical Data
Operating pressure:
Recommended operating pressure:
Test pressure:
(1 MPa = 10 bar = 147 PSI)
Hot water temperature:
Recommended hot water temp.:

English
Symbol description
max. 1 MPa
0,25 – 0,5 MPa
1,6 MPa
max. 80°C
65°C
Assembly see page 31 + 32
To adjust the hot water limiter on single lever
mixers, please see page 33.
Do not use silicone containing acetic acid!
Dimensions (see page 34)
Flow diagram
(see page 34)

Rate of flow mixer

Rate of flow handshower
Spare parts (see page 37 + 38)
Special accessories
special tool (58085000) order as an extra
Installation kit order as an extra
Operation (see page 36)
Cleaning (see page 35) enclosed
brochure
Test certificate (see page 39)