Samson 5 D Einbau- Und Bedienungsanleitung Seite 8

Mounting
The thermowell is firmly connected to the controller. Loosen hexa-
gon screw (2) and turn lever arm (1) to facilitate installation. If the
lever arm must be removed to install the controller, proceed as fol-
lows: loosen hexagon screw, remove lever arm and take the
connecting piece (3) out of the hole (5). Screw the controller into
the boiler using hemp or sealing compound (do not use washers).
NOTICE!
Do not damage the thread by overtightening.
When reassembling the lever arm, insert the connecting piece so
that the rectangular recess (4) faces the hexagon of the thermowell
(Fig. 3).
8