Walimex Pro 4.5 Camera Assist Monitor 4K IPS Gebrauchsanleitung Seite 17

Setting
Language: English, Chinese, Español, Português, Français, Nederlands, Deutsch,
Japanese
To select the OSD language.
Aspect Ratio: Panorama, Auto, 4:3, 16:9, Zoom 1, Zoom 2, Just Scans
To change the display ratio.
No Signal: Blue Screen, Red Screen, Green Screen, Black Screen, White Screen
Color options of screen background when there is no signal.
OSD Trans.: Off, Low, Middle, High
To adjust the level of OSD transparency.
OSD H: 0~100
To adjust the OSD position in horizontal.
OSD V: 0~100
To adjust the OSD position in vertical.
Camera Mode: Off, 480P, 1080i
Photography mode, monitor relays the sensor picture in real time, no image
de formation, no black screen, no delay, no distortion.
Zoom All: 0~10
Select this function, press " " or " " button to zoom in or zoom out.
OSD Time: Off, 10Sec, 20Sec, 30Sec
To select the menu display time.
U/D zoom (zoom function): 0~10
L/R Zoom (zoom function): 0~10
Use the U/D and L/R zoom functions to zoom in on the camera feed.
Since the different camera sensors work with different aspect ratios you can adjust
the height and width of the image as you wish. Scale to the percentage, e.g. to
display in full screen mode. For example, first set the width until the feed fills the
screen, then enter the same height value to maintain the correct aspect ratio.
Backlight: 20~100
To adjust the monitor backlight brightness.
Volume: 0~100
Earphone output level adjustment.
USB Upgrade: When you need to upgrade the software, copy the file to a U disk
(e.g. twin USB stick with fitting usb plug or external HDD with fitting cable), then
connect it with the upgrade USB port, then press the " " button to confirm. After
the upgrade, the monitor will automatically restart.
32
Reset: Press " " button to confirm.
All monitor settings will revert to the factory settings.
Function
Center Marker: On, Off:
To set center mark (cross mark) display.
Safe Frames: Off, 96%, 93%, 90%, 85%, 80%, 2.35:1
Lets you adjust the safe area for filming.
Image Freeze: On, Off
Captures the current picture as a still (capture function) for evaluation of the image.
Image Flip: Off, H_V Flip, H Flip, V Flip
The H_V Flip, H Flip, V Flip mirrors the image horizontally, vertically or both.
Check field: Mono, Red, Green, Blue, Off
Displays the picture in monochrome (black & white) or in primary colors.
P2P: On, Off
The pixel­to­pixel display mode displays the full pixels of the original signal. The
picture might be cropped if the resolution is too high. This mode ensures that the
material is shown without any artefacts that might appear when scaling data for the
monitor screen (doesn't support the 4K signal mode).
Focus Assist: On, Off
With HDMI input, select this function and the image will change into monochrome
and peaking. Red highlights will be superimposed over those parts of the mono­
chrome image which are in focus.
Shortcut Button Setting F1/F2
Custom function setting, please see 8.1 Function keys Instructions.
33