With Skin Care Products - Silvercrest SGRBI 500 A1 Bedienungsanleitung

With skin care products

WARNING! RISK OF INJURY!
► Always avoid the eye area during use! It is very sensitive .
Use of the appliance with various skin cleansing and skin care products is ideal
for thorough cleansing or for removing make-up .
1) Select the appropriate brush attachment 7/0 (see section "Brush heads")
and insert it onto the drive head 5 .
2) If you wish to remove make-up, we recommend using make-up remover
beforehand .
WARNING! RISK OF INJURY!
► Remove eye make-up completely with conventional eye make-up remover!
Do not touch the eyes with the brush attachment 7/0! It is very sensitive .
3) Apply the desired skin care / peeling cream / etc . onto the skin .
4) Moisten the brush attachment 7/0 with warm water .
5) Place the brush attachment 7/0 gently on the desired area of the skin .
6) Press programme button 1 as often as required until you reach the desired
programme (see section "Programmes") .
7) Move the brush attachment 7/0 over the skin with circling movements:
–
Each cheek: 20 - 30 seconds
–
Forehead: 20 - 30 seconds
–
Nose and chin: together 20 - 30 seconds
After 1 minute operating time, the appliance will switch off automatically .
NOTE
► If you wish to stop the treatment before the minute has passed, press the
programme button until the appliance stops .
8) Rinse your face with clean water and then dry it .
9) If required, now apply some care cream onto your face .
10) Rinse the brush attachments 7/0 thoroughly with clean water after each
use . Allow them to dry in the air afterwards .
NOTE
► For reasons of hygiene, we recommend replacing the brush attachments
regularly, at the latest however when the brushes are bent outwards . A re-
placement brush attachment "normal" (pink) 9 is included in the package
contents . Further replacement brush attachments 7/0 are available from
our Service department (see section "Ordering replacement parts")
■ 12 GB │ IE │ NI │ CY
│
SGRBI 500 A1