Skin Care After Application; Cleaning And Care - Silvercrest SHE 3 E1 Bedienungs- Und Sicherheitshinweise

Press and hold the release button for the roller holder 7 again .
Simultaneously, place the other roller holder 2 with roller 8 /
1 on top of the product in such a way that the gear of the roller
holder 2 and the product are above one another .
Make sure that all parts are completely attached before releasing
the release button for the roller holder 7 .
˜ Skin care after application
Apply body lotion, oil or cream to the skin .
Do not apply any substances (e .g . deodorant) to the treated
areas, which could irritate the skin .
˜ Cleaning and care
Roller holder 2 and the roller 1 / 8 :
Note: Clean the roller holder 2 and the roller 1 / 8 after every
application . Check whether the surface of the roller 1 / 8
is undamaged . To do so, turn the roller and check the surface
carefully .
Note: Switch off the product before cleaning and care .
Switch off the product (see section "Inserting / replacing
batteries") .
Clean the roller holder 2 and the rollers 1 / 8 with the
cleaning brush 10 after every application .
Place the protective lid 9 on the roller holder 2 .
Wipe down other parts with a damp cloth, when necessary .
72 GB/MT