Keep Beverages Cold - Silvercrest HG01735 Bedienungs- Und Sicherheitshinweise

Connect the car adaptor
socket via the included 12 V connector cable
Connect the connector plug
2
Refer to the operating manual for your vehicle for the posi-
tion the ignition needs to be in for the cigarette lighter
socket to supply the appropriate voltage.
If necessary, turn the ignition to the necessary position.
The operating LED
lighter socket is powered. Set the ON / OFF switch
position "I" to switch on the product. The product will now
start to heat up.
Note: The product will not heat up with the ON / OFF
switch is set to position "0", even if the car adaptor
3
is plugged into the cigarette lighter socket and the
10
operating LED
Place the product into a suitable beverage holder.
Disconnect the product from the connector plug
then open the lid
ages from the product.
Note: Always disconnect the product from power if it
contains no beverages.
Note: Be sure to disconnect the product from the power
supply when exiting the vehicle. The battery may other-
wise become too weak to start the engine.

Keep beverages cold

Open the lid
5
are to be kept cold.
to a 12 V cigarette lighter
10
9
will light up red when the cigarette
7
lights up.
7
or the closure
5
of the product and add beverages which
8
to 12 V connector socket
to dispense bever-
6
.
to
3
and
9
GB/IE 27