Introduction - Cameo F2 FC Bedienungsanleitung

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait for
a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobes are used.

INTRODUCTION

CONTROL FUNCTIONS
1-channel, 3-channel, 4-channel Direct, 6-channel HSI-CCT (Hue Saturation Intensity - Correlated Colour Temperature), 7-channel RGB-CCT,
8-channel Direct, 10-channel HSI-CCT, 16-channel Direct-CCT
Master / slave mode
Stand-alone functions
PROPERTIES
1 x High Power 240W RGBW LED. 17° - 53° Beam angle, manual zoom. 200mm Fresnel lens. Configurable PWM frequency (flicker free).
DMX-512 control. RDM enabled. Manual control. 4 dimmer curves. 16 bit dimming. Master / Slave mode. Extremely quiet operation thanks
to heat pipe cooling and fan. Operating voltage: 100 - 240V AC / 50 - 60Hz. Power consumption: 240W. Mounting bracket, filter frame and
8-way barn door included.
The spotlight complies with the RDM standard (Remote Device Management). This device manager allows the user to request the status of
and configure RDM end devices via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable
parts inside. Maintenance and repairs should be exclusively carried out by qualified service
personnel.